Hoffmann MU3-PD Pneumatic Digital dovetail Routing Machine

Original price was: £4,281.00.Current price is: £3,995.00.

(£4,794.00 inc VAT)

Professional grade machine, Pneumatically controlled dovetail routing machine to rout a single dovetail keyway with each machining cycle.

The keyway location is adjusted by positioning the guided centre fence plate on the machine table; The keyway length (routing height) is adjusted by setting a height-stop to the desired setting. Both positions are shown on seperate digital displays for accuracy and repeatability.

Pressing the pneumatic foot pedal starts the machining cycle

  • Pneumatic clamp, secures work
  • Router head advances until pre-set height is reached
  • Router head returns to home position and motor is switched off
  • Pneumatic clamp releases work-piece
Call our sales team 0116 2893469
Payment Options
  • Finance Options Available
  • Payment on Account/Invoice
  • Credit/Debit Card
Payment Options

Technical Specifications

Machine type
Dovetailers
Voltage/Phase
240V / 1ph
Motor speed
35,000 rpm at idle
Motor carriage guides
20mm diameter guide rods, precision ground.
Operation
pneumatic – dual cylinder design
Dust suction outlets
2″ – 50mm
Router bits available
W-0, W-1, W-2, W-3 (W-4 with optional larger motor)
Make
Hoffman
Air supply
90 psi – approx 0.1 cubic foot/cycle
Collect size
1/4″
Digital display
Dual liquid crystal display, 3/8″ digit size, accurate to 0.004″
Max. height routing
3 3/4″ – 95mm / moulding 5 7/8″ – 150mm
Installed router bit
W-2, Solid Carbide
Dimensions
29 1/8″ x 25 5/8″ x 32 3/4″ (without optional table extensions)

Professional grade dovetail machine


Solid cast aluminium shell with large, ergonomically shaped table surface, precision linear bearings, galvanized steel motor carriage with integrated motor. Fine adjustment and digital displays for routing height and routing location.

Operation

The keyway location is adjusted by positioning the guided center fence plate on the machine table; The keyway length (routing height) is adjusted by setting a height-stop to the desired setting. Both positions are shown on seperate digital displays for accuracy and repeatability.

Pressing the pneumatic foot pedal starts the machining cycle

  • Pneumatic clamp, secures work
  • Router head advances until pre-ser height is reached
  • Router head returns to home position and motor is switched off
  • Pneumatic clamp releases work-piece

The MU3-PD model is the more automated version of the MU 3 and MU3-D models.

A short stroke cylinder is used to clamp the material the instant the foot pedal is pressed, while a second, larger cylinder is used to move the router carriage up and down.

The main benefits compared to the manual machines are faster and provide a  more comfortable operation, and more consistent results due to set routing feed rates and the fact both hands can remain on the material during the routing sequence, A very important advantage when proccessing longer parts.

Need Assistance or Expert Advice?

We pride ourselves in offering a friendly and professional service